EZ Sealer Wet Look Finish - 5 Gallon

EZ Polish System® EZ Sealer Wet-Look Finish to beautify, protect and preserve the natural beauty of all your concrete & masonry surfaces. This high-gloss formula can also be used on pavers and artificial stone, and it also makes a great top coat over stains.

Features 

• High Gloss Clear Finish
• Excellent Topcoat Over Paints & Stains
• 100% Acrylic for Maximum Durability
• Interior/Exterior & Vertical/Horizontal
• Resists Hot Tire Pick Up
• Non-Yellowing

Application Directions

DO NOT THIN. Stir or shake before applying. Use product when Temperature is between 50 - 80 F(10 - 27 C). Do not apply in direct sunlight. Do not apply to wet surfaces or if rain or heavy dew is expected withing 24 hours.

Apply a thin coat using a nylon/polyester brush, 1/4” - 3/8” nap roller, high quality pad applicator or a high quality pump sprayer with an adjustable tip at a spread rate of 200-450 sq ft (19-42 m2) per gallon. Spread rate is highly dependent on surface roughness and porosity. If sprayed, backroll to uniform thickness with a microber pad.

Allow First coat to dry 4 hours, then apply a second coat at a spread rate of 350-700 sq. ft (33-65 m2) per gallon. Additional coats (no more than 4) may be added for a higher gloss and added protection.